EQUIPMENT
Exceeding Your Expectations
HYDROSEEDING SYSTEMS
All Ontario is a distributor for Canadian Turf Technologies a Canadian manufacturer of a 757 Liter and/or 200 US Gallon Jet Agitation Hydroseeding System since 2020.
All Ontario is a distributor for Turbo Technologies the manufacture of Turbo Turf Jet and Mechanical Agitation Hydroseeding Systems since 1990. Jet agitated hydroseeding systems are available in sizes from 50 gallon to 1000 US Gallons and mechanically agitated hydroseeders are made in 400, 500, 750 and 1000 US gallon sizes.
WHICH TYPE OF HYDROSEEDER IS BETTER?
MECHANICAL AGITATION (PADDLE) or JET AGITATION
LIQUID ICE CONTROL EQUIPMENT
All Ontario is a distributor for Turbo Turf a manufacturer of Brine Sprayers (Direct Liquid Applicators) and Brine Makers. Turbo Turf began building Brine Sprayers (Direct Liquid Applicators) in 2006 and Brine Makers in 2012.
Brine Sprayers (Direct Liquid Applicators) are made in various sizes from 189 to 6,189 Liters and/or 50 to 1635 US Gallons. Systems and are available with in 12 Volt D/C, Gasoline or Hydraulic powered configurations.
Brine makers are available in in 946, 1,703 and 3,028 Liter and/or 250, 450 and 800 US Gallon Sizes sizes with a choice of either gasoline power or 220 volt single phase electric.
TRADE IN, USED AND CLEARANCE EQUIPMENT
We allow for trade in hydroseeders from FINN, Bowie, Turbo Turf, Turf Maker, MS Sprayers, Apex, Epic, Eden, Easy Lawn, Henderson and Titan.
All of the trade in used and clearance equipment are in good working order but have minor weathering and have undergone a comprehensive assessment to ensure functionality and that they are fully operational upon receipt.
Check out what is currently available in our Trade In, Used and Clearance Equipment as well as anything available in our inventory. There may be hydroseeders, brine sprayers and/or brine makers. If you are looking for a used hydroseeder, brine sprayer and/or brine maker this is where you can get equipment at a big savings. For any units without photos pleased contact us and we can email a photo to you.
We can ship to anywhere in Canada.
PARTS AND SERVICE
We are here to support you with any parts requirements that you have for your hydroseeding and/or liquid ice control equipment.
We stock a selection of the most commonly requested parts and for any part we do not have in stock, we offer a quick turnaround limiting your downtime. To keep your machine working at peak performance all season long, We only use manufactured supplied parts.
Our service technicians, are specifically trained to repair hydroseeding and liquid ice control equipment and know workings of most hydroseeding and liquid ice control equipment on the market.